An NFC apartment access card looks like a plain plastic card, but a residential project succeeds or fails on four decisions: the frequency the building already runs, the chip family the panel can manage, the readers' accepted card list, and how cards are encoded and revoked. This guide follows the order those decisions actually happen, from one condominium entrance to a multi-building estate with gates, lifts and parcel lockers.
Contents
It is a passive contactless smart card carrying the credential a door reader verifies. In the NFC world it runs at 13.56 MHz under ISO/IEC 14443A, is usually built to CR80 (85.6 × 54 mm, 0.76–0.84 mm thick), and holds a factory-set identifier plus writable memory organised in sectors or application files. Near-field communication is the same radio layer at short range, which is why one card can open a door and still hand a URL to a phone.
What it is not: a 125 kHz prox fob. The two use different frequencies and protocols, so a 13.56 MHz card is invisible to a low-frequency reader, and the reverse holds. Many upgrades stall because cards were ordered before anyone checked which readers were on the doors. Form factors are grouped on our RFID cards page.
The frequency is decided by the readers already installed, not by preference. A low-frequency building will not read an NFC card without dual-frequency readers or a replacement, and a new NFC system gains little from accepting legacy fobs unless a transition window is planned.
| Item | 13.56 MHz (NFC / HF) | 125 kHz (LF) |
|---|---|---|
| Typical credential | MIFARE Classic, DESFire, NTAG, CPU card | Read-only ID card or fob |
| Data carried | UID plus writable sectors or applications | UID only in most installations |
| Phone interoperability | Possible where the reader supports mobile credentials | Not available |
| Multi-application | Supported on larger-memory chips | Not supported |
If the estate runs low-frequency fobs and readers cannot all be replaced at once, use dual-technology readers for a defined window and put the cut-off date in the resident notice. The migration logic matches our NFC key fob access control guide: keep the old credential working until the new one is proven at every door.
Chip choice follows the threat model and the panel's key management, not the unit price.
| Chip family | Where it fits | Decision note |
|---|---|---|
| MIFARE Classic 1K / 4K | Systems already coded for it; lower-risk internal doors | Widely deployed, but its crypto has been publicly analysed; new builds should weigh a stronger option |
| MIFARE DESFire EV2 / EV3 | Main entrance, lift control, multi-application estates | AES mutual authentication, several applications per card, key diversification possible |
| NTAG213 / 215 / 216 | Tenant information, amenity links, maintenance tags | Simple NDEF exchange; not a managed credential unless the panel reads it as one |
| CPU card (ISO 7816-4) | High-security estates, combined access and payment | Highest flexibility, needs matching readers and key infrastructure |
A workable residential answer is DESFire EV2 or EV3 as the door credential, with NTAG used separately for information tags rather than as the key. Memory maps for that family are covered in the NTAG213 encoding guide.
Collect five facts from whoever maintains the access system before ordering. Missing one is the usual reason a delivered batch fails at the door.
Readers are a separate purchase; categories and frequency variants appear on our RFID card readers page. Where a building mixes vendors, take the accepted-card list from each and design one card that satisfies all of them, or accept two credentials.
Mobile credentials are attractive to residents and awkward to standardise. A phone can present a credential only if the reader and panel support mobile issuing, and wallet-based keys depend on the lock vendor's certification rather than the card supplier. This is a reader-side decision that a card order cannot solve.
The workable model is hybrid: a plastic card for every resident, a mobile option where supported, and physical cards for visitors, contractors and staff.
Residents judge the system by how many things one card opens: entrance gate, lobby door, lift floor selection, mailbox bank, gym, parcel locker. Each point may come from a different vendor, which is why multi-application chips matter.
Plan the layout before encoding — one application for door access, one for lift floors, one for lockers — each with its own key set and revocation scope, so removing gym access does not disable the front door.
Three choices carry most of the outcome. Do not rely on the UID alone: a UID-only system accepts any card carrying the same number. Use sector or application keys with diversification, so one compromised card does not expose the building. Keep revocation at the panel, not in a spreadsheet — a collected card still valid in the database is still a key.
Keep the claim honest: no credential is unclonable in absolute terms. What differs is the effort and equipment required, and whether the attempt leaves evidence. DESFire EV2/EV3 with diversified keys and an audit log is a defensible residential specification; MIFARE Classic on a building entrance is a known weak point a committee should be told about in writing.
The body has to survive keyrings, pockets, laundry and outdoor readers. PVC is the default for cost and print quality; PET where recycled content or higher toughness is requested; wooden and ceramic bodies for premium residences where the card is also a brand object; epoxy tags for outdoor gate posts and mailbox panels where a card would be destroyed.
Most apartment projects settle on PVC at 0.84 mm with glossy or matte lamination and a module matched to the reader's coupling. If the card is also a design item, laser-engraved wooden or ceramic bodies are the ones residents keep — those formats are grouped on our wooden cards page. Confirm the inlay and antenna still work inside the thicker body before printing.
Face content is a privacy decision as much as a design one. Print the building or management mark and the card serial; print a unit reference only where the operator's policy allows it. Leave out resident names, phone numbers, ID numbers and unit-plus-name combinations that let a found card identify a person.
Method follows quantity and artwork: offset or silkscreen for larger runs, digital for short runs and variable data, laser engraving for abrasion-resistant serials. Keep the serial on the same database key as the chip data so a found card can be matched to an issue record without opening the panel.
Encoding is where projects lose time. Agree the data map, run a pilot batch, test it at every reader type, then authorise the full run: 20 cards at the main entrance, lift and gate; written sign-off from the installer; then personalisation with sequential serials and a delivery list.
Issuing needs a paper trail — serial to unit, issue date, the staff member who handed it over — plus a defined process for lost cards and move-outs. Revoke at the panel the day it is reported, and reissue with a new serial rather than re-enabling the old one.
Four variables move the unit price: chip family and memory, body material, print process, and whether encoding is done in-house. A blank PVC card and a DESFire card with per-unit data, printed both sides and packed by unit number are different products with different lead times.
CBT has made RFID cards and tags since 1996, with a 20,000 m² plant, more than 500 staff and shipments to over 136 countries; standard stock can be sampled within 24 hours, and capacity reaches 1.5 million pieces a day at a 99.8% yield. Ask for a sample set matched to your reader before committing to a quantity.
Most delays come from a skipped survey and from ordering before the reader list was confirmed.
Only with the operator's written authorisation and access to the system keys; an unauthorised copy is a security breach and in many jurisdictions an offence. The correct route is a replacement issued through the panel, with the old serial revoked.
No. The frequencies and protocols differ, so the reader cannot see the card; you need a dual-frequency reader or a replacement.
It is common in existing systems and inexpensive, but its cryptographic weaknesses have been public for years. For a new entrance, DESFire EV2 or EV3 with key diversification is the more defensible specification.
Only where the reader and panel support mobile issuing; that sits with the access vendor. Most estates keep the card as default and add mobile as an option.
A few centimetres is typical for a passive 13.56 MHz card; the figure depends on the reader's antenna and power, so ask the reader vendor for the rated distance.
Life depends on body material, lamination and how the card is carried. A laminated PVC card at one door typically lasts several years; edge abrasion and bending are the usual failure points.
Yes, when the readers accept the same protocol and the chip has enough applications — the main argument for a multi-application chip over a read-only ID card.
Revoke the serial at the panel the day it is reported, update the register, and reissue with a new serial. Never re-enable a card that has left the operator's control.
Both sides can be printed and the serial laser engraved. Keep resident names and phone numbers off the face, and keep the printed serial aligned with the encoding record.
The reader model and accepted card list, chip family and memory, quantity per building, print artwork, whether encoding is included, and the destination country.
Send the reader model, the accepted card list and the planned quantity per building to info@chipbond.com and you will get an engineering reply within one working day, not a templated price list. We have produced contactless cards and tags since 1996, with a 20,000 m² plant and capacity of 1.5 million pieces a day at a 99.8% yield. Both the China and Thailand bases run the same IQC/QA procedures, so peak volume can be split across two sites, and where a destination applies extra duty to Chinese origin we can quote from the base that gives the better landed cost. Tell us the destination country and we will price it from the closer base; existing card programmes can be compared on chipbond.com.